1. Press CLEAR to return back to HOME screen
2. Press ORANGE WRENCH/HAMMER (Upper Right Corner)
3. Press WIFI
4. Press SECURITY
5. Enter PASSWORD
6. At this point, you will choose your security type
7. Enter your key
8. Enter your SSID network
9. Press ENTER
10. Choose YES to apply your settings
11. Press CLEAR twice to return back to HOME screen
Category Archives: First Data FD
First Data FD130 – VXN error 13 Authentication Failed
1. NO internet connection to the gateway datawire
2. Datawire provision required
Please call SW Merchant Services Group office at 1(866) 477-8088 for assistance.
First Data FD130 – How To Set Date and Time
1. Press CLEAR to return back to HOME screen
2. Press ORANGE WRENCH/HAMMER (Upper Right Corner)
3. Press DATE / TIME
4. Enter NEW date MMDDYYYY
5. Press ENTER
6. Enter NEW time HHMMSS (Military Time)
7. Press ENTER
8. Press CLEAR to return back to HOME screen
First Data FD130 – How To Test A Network Connection
1. Press CLEAR to return to HOME screen
2. Press ORANGE WRENCH/HAMMER (Upper Right Corner)
3. Press LAN
4. Press PING
5. Enter IP Address to ping – www.yahoo.com
6. Press ENTER
INTERNET UP AND RUNNING –> IP Address RESPONSE = XXms
NO INTERNET CONNECTION –> DNS FAILED 2742 RESPONSE = NONE
7. Press CLEAR twice to return back to HOME screen
First Data FD130 – How To Print Reports
1. Press OTHER
2. Press REPORT
3. Select PRINT REPORTS
4. Select the desired report type to print
Report prints
First Data FD130 – How To Reprint A Sales Receipt By SEQ Number
1. Press OTHER
2. Select REPRINT
3. Enter a transaction SEQ# or press Enter to reprint the last transaction
The terminal re-prints the sales receipt.
First Data FD130 – How To Do The Settlement
1. Press OTHER
2. Press CLOSE BATCH
3. “Batch close complete” appears when the batch is closed
4. The terminal automatically prints a report summarizing the batch
First Data FD130 – How To Do A Credit Refund
1. Press OTHER
2. Press REFUND
3. Enter the refund amount and press ENTER
4. INSERT the card into the chip reader, SWIPE a magnetic strip card, or hold an NFC card/device near the terminal
5. Wait for the business copy of the receipt to automatically print
6. If prompted, Print Customer Receipt? Press YES to print a customer receipt or press NO for no receipt
7. Press CLEAR to exit
First Data FD130 – How To Void By SEQ Number
1. Press OTHER
2. Press VOID
3. Enter SEQ # from the transaction receipt and press ENTER
4. Press OK
5. Wait for the business copy of the receipt to automatically print
6. If prompted, Print Customer Receipt? Press YES to print a customer receipt or press NO for no receipt
7. Press CLEAR to exit
First Data FD130 – How To Adjust Tips By SEQ Number
1. Press OTHER
2. Press ENTER TIPS
3. Enter SEQ # from the transaction receipt and press ENTER
4. Press EDIT TIP
5. Key in the new tip amount and press ENTER
6. Press CLEAR to exit